1/72 PSC US Heavy Weapons

That alphabet soup title is interpreted as 1/72 scale Plastic Soldier Company's US Heavy Weapons teams for World War II.  I just figured the abbreviations fit better into feed readers. So, onto the update.  You know what it's about.

Here's a picture. Click for a much larger picture with details.

I didn't assemble everything in the box, as I don't need multiple chemical mortars or even multiple .50 cal MGs for the games I will play.  I have the sprues so I'm ready to add them as I need.

What I do have are plenty of machine guns: three M1919 .30 cal MG teams, two M1917 MG teams (got lazy and didn't do the third one), and one .50 cal MG. I love the size of that .50cal M2 Browning! Though I don't really need the other two right away, I plan to make those teams at some point.

The other essentials are the three bazooka teams. Seems like every US list has bazookas in abundance, particularly late war.  So I wish I had a few more but three's enough.  Then come the mortar teams. Again, three of each mortar is overkill though multiples of the 60mm mortar might be sensible. I've got a 60mm, 81mm, and a 4.2in chemical mortar. That's more than enough firepower for a single platoon!

Lastly you will see five BAR gunners hanging around the back corner of the photo. I had mistakenly assembled these a while back thinking them to be rifles. I was rushing and didn't pay attention to what I was doing. So I left them primed and sitting on my table. Since I had the paints out for US infantry I finished them.

That rounds out all my infantry in 20mm, though I have plenty left over for extra squads of both US and German soldiers. The next phase will be to complete some vehicles so these anti tank weapons have some purpose!

20mm PSC German Heavy Weapons

Got to work this week on the massive pile of 20mm Plastic Soldier Company boxes that are clogging my hobby room. I knocked out a box of the German heavy weapons models. I didn't put together every model in the box.  Here's what I've got.

Click the picture for a bigger view.

There were models in this box that I couldn't imagine I'd ever need to have in multiples. Specifically that'd be the 80mm and 120mm mortars. Realistically those sized mortars would be far behind the troops and not on board. Still, Bolt Action puts everything on the table whether it make sense or not (they need to sell models, after all) and I could use them as objective pieces, etc. I just didn't want to make three of each in one sitting.

The models are excellent quality and I have few complaints. My only real gripe is that they give you six panzerschreks, but only enough models to build three teams. Since I didn't plan to build all six panzerschreks nor all mortar teams, I stole a figure from the mortars to fill out my team. 

I liked having the panzerfausts and wished there were a few more in the box. Six is a good start but a platoon could potentially have more than just six. At least with a disposable weapon like this you don't necessarily have to show which models have them. These guys came with a good amount of gear. I've no clue if it's historically accurate, but it looks good on these models and fits in with their other infantry figures.

The main thing I wanted out of this set was the MG42 teams. A German army can't have too many of these teams, and again my only complaint is I'd have loved to have more than three. These models look great. A little pose variety would've been nice.

Lastly there were the mortar teams. You already know my thoughts on my need for them. As far as the models go, they are excellent. I'll say the mortar model itself was nicely done and sturdy. So many of these mortars in other sets just lean together and need a gallon of glue to stay in place. These PSC mortars, however, were fitted together cleanly.

So that wraps up German heavy weapons. Now I will jump over to do the US heavy weapons teams before tackling all the vehicles. This turned out to be a far larger project than I was expecting. Still, when it's done I'll have a couple of nice looking platoons with plenty of options.

1/72 Scale PSC US Infantry

I completed a platoon of Plastic Soldier Company's Late War US Infantry in 1/72 scale. These models took a little longer than I expected. The paint job came out fine, but these pictures are not the best. My camera is out of batteries so I had to use my iPhone. Since I haven't updated for a while, I decided to post these okay pictures and take better ones later.

I was not as impressed with this box of PSC models as I was with the Germans. The box of US Infantry is stuffed with a series of bad model choices, and I had to buy a second box just to get enough rifles to make a platoon with HQ. That's a rip off compared to the German box.

The US box gives you two poses of six models with SMGs, and one has a walkie talkie radio. I chose to make the radio guy my LT, which means all three NCOs for my squads have identical kneeling poses. That's not too bad, but then you come to the BAR models. You are given twelve BAR models per box. That's just way too many, even for a late war platoon. Then the model choices get even more questionable. You have one unarmed soldier that might be holding a grenade, or might be trying to hold his pee. I can't tell. What good are three weaponless soldiers? Then you get three medics, and 3 two-man radio teams. Overkill. Polish all that off with three casualties.

Why did they fill this box with so much of this extra crap, including six models that are either dead or weaponless? You end up short of actual rifles and therefore must buy another box. It's cheap enough, but I shouldn't need a second box not with all the extra BAR gunners, radio teams, and guys with full bladders. There was space to put the rifles in one box.

Some of the poses are a little strange, but for the most part they're good with lots of firing poses. I didn't realize I had medics until I saw the cross stamped on their helmets. Since they have no bags they only have that one roll of bandages. At first, I thought they were binoculars. Otherwise, the weapons and all the other stuff look great. There are several marksman models with scopes, too. A nice touch for US squads. I know their suspenders are wrong, but I don't care.

One other complaint I had was that these models did not fit together as nicely as the Germans. There are a lot of gaps in these models where the arms join. Also, the flash and mold lines were pretty severe, and I had to choose between leaving the mold lines or filing away details, particularly on the faces and helmets.

So I wasn't as satisfied with these, but it's all done now. I really don't need more. I'll be adding support units like MGs and AT weapons to both US and German platoons. After that, I get to move onto the vehicles.

1/72 Scale PSC German Infantry

I have long given thought to 1/72 scale (20mm) for World War II gaming, but always put it aside as impractical. It seems to be an exclusively British thing with little to no support for that scale in the US. Only kits sold in model stores were easily available, and those are intended for dioramas. However, now with the wide availability of Plastic Soldier Company's 1/72 scale models things have changed.

I haven't played any games in this scale yet, but I think 20mm will prove to be a great scale. The proportions on 20mm models look far more natural than either 15mm or 28mm. While I've collected a good amount of 15mm models I oftentimes have difficulty seeing the weapons on the models in that scale. I like 28mm well enough, but platoon sized games look crowded at 28mm and the models all look too chunky.  Nothing inherently wrong with either scale, but I wanted something that is easy to see and handle, be compact in storage and on the table, but also retain realistic proportions. The 20mm scale seemed to fit the bill.

Here's the contents of the PSC late war German infantry, all painted and ready to go. Click for a larger picture.

I really liked these models, though I'm not a fan of having to assemble them. Nothing was too difficult, though, and they fit together nicely. You get enough to make three 10 man rifle squads with MG team and SMG toting NCO. You get three radiomen and three medics, which is a little much. At least the radiomen can be used as forward observers and spotters. The two extra medics are a waste.

My only complaint is that you get too many SMGs, at least for how I want to construct my squads. I guess if you put in two SMGs per squad you could potentially get four total squads from one box. If you don't want to do that, then you'll end up like me with a bunch of extras. I'm sure they'll get used somewhere.

I did cheat a bit with this platoon. I ran across some Zveda 1/72 scale Germans on clearance at the local hobby store. I switched out the two extra medics and added in a senior officer using his field glasses and a different officer type, which I'll probably use for my LT.  Here's a picture of how the two Zveda models scale with the PSC. A pretty good match, I say.

I'll probably build the rest of the Zveda models, though they have some strange poses and the MG team is carrying a weapon that looks more like a broomstick than an MG.

Here's a look at the radioman and medic models.

Finally, you get six MG teams in the box which I think is awesome. Three are carrying their weapon while three teams are deployed. Here's a sample of both.

As you can tell from these pictures, many of the Germans had helmet covers modeled. I liked that touch but I'm not sure if I got the camo exactly right for them. Well, it looks suitably "WW2" for my taste. Also the box came with numerous head swaps, including several bandaged heads for walking wounded types. That was a nice touch, though I only made one swap just to see how it came out.

There's a lot more 1/72 scale WW2 coming up. I got just about everything for PSC US and Germans in this scale. I'll be working on Americans next, but will take a break with some Reaper models in between.